Baratza SETTE 30 AP Guia De Inicio Rapido página 2

®
Sette™ 30 AP
Thank you for choosing the
Baratza Sette 30 AP for your
home grinding needs!
This is just a quick start guide. If you would like more
detailed instructions, please skip ahead to the full manual,
found online at baratza.com/documentation/
Setup:
Install the lid onto the bean hopper. Line up the 3 hopper
tabs with the slots in the top of the grinder. Set the hopper
in place and rotate firmly clockwise until the hopper clicks
into place. Note: the grinder motor will not turn on with the
hopper removed. Ensure the shutoff knob is in the open
position before grinding coffee. Note: the grinder will also
not run if the black indicator on the adjustment ring is set
above setting 31. Upon first use, you will need to rotate your
adjustment ring below setting 31.
The arms that hold your grounds bin, can also be converted
to portafilter mode, and used as a rest while you dose directly
into a portafilter. To convert the arms, pull them straight out,
rotate 90° and reinsert. Note: this does not allow hands-free
grinding into the portafilter, it helps to position the portafilter
for improved grounds transfer from the grinder.
Grind Size Adjustment:
The adjustment ring moves from coarse (31) to fine (1). With
the grinder running, turn the knob to the right to move from
coarse to fine. Espresso: start between 7 and 10, Manual
brew: start at 25.
WARNING: The Sette grinds at a very high speed, be careful not to overfill your bin! If a mound
of coffee backs up into the chute, it will clog the grinder and blow the internal fuse.
All manuals and user guides at all-guides.com
SETTE™ 30 AP QUICK START GUIDE
Grinding Operation:
Place the grounds bin on the arms. Use the up and down
arrows to change your desired grind time. Press the START
button (>ll) to begin grinding. While grinding, the screen will
count UP the seconds and stop when the preset time is
reached. When the screen reaches the preset time, the motor
will stop and the display will reset again to the programmed
time. For manual operation, press and hold the START button
until you obtain the desired amount of coffee, then release
the START button, the grinder will then stop with the screen
showing the total amount of seconds run. To get out of
manual mode, press STOP.
First Use:
We first recommend that you grind a handful (~40g) on
setting 15 and discard. This begins the burr seasoning
process and primes the grinder for normal operation.
GRIND TIME
GRIND TIME
Rev 7/26/2017 (v2)