Fuse Replacement - Global Test Supply Nova-Strobe bax Guia De Inicio Rapido

while pushing it into place (see Figure 4). Make sure the lamp is
in straight and centered in the reflector hole.
CAUTION:
4. Reinstall the reflector and then position the front lens in place
matching up the notches on the lens with the two small tabs on
the housing to prevent lens rotation (see Figure 2). Push the tabs
on the front rim outward and press the lens into place.
5.2

Fuse Replacement

Under normal operating conditions, the fuse within the stroboscope
should never blow. Examples of abnormal operating conditions would
be foreign materials entering the strobe, such as water, pulp, ink, etc.
Find Quality Products Online at:
All manuals and user guides at all-guides.com
Red Dots
Notches
Figure 4 Lamp Replacement
Do NOT allow the reflector to contact the lamp.
GlobalTestSupply
www. .com
sales@GlobalTestSupply.com
E-7