EDM Product 50140 Instrucciones De Uso página 13

50140
REF.
Panel de yeso
Parede de gesso / Drywall / Cloison sèche
Use a stud finder to locate two
adjacent studs where you with to
instal. your mount. Use the wall
plate as a template to mark four
holes.
Drill a pilot hole at each marked
location.
Fix the wall plate onto the wall
using the concrete anchors and
lag bolts provided.
C/D/E
G
Take the arms with the TV
mounted and fit the grooves on
the top ledge of the wall plate.
Insert the tightening bolts (F) on
the bottom and tighten.
INSTRUÇÕES IMPORTANTES DE SEGURANÇA / IMPORTANT SAFETY INSTRUCTIONS
Choose proper screws to fix the
mount to the back of your
display. Spacers and longer
screws should be used if the
back of your display is curved or
recessed.
Take the arms with the TV mounted and fit
the grooves onto the top ledge of the wall
plate. Insert the tightening bolts (F) on the
bottom and tighten.
Adjust the tilting screw in the TV
plate to get the best Visual
experience.
INSTRUCCIONES IMPORTANTES DE SEGURIDAD
Instalación de hormigón
Instalação de concreto / Concrete installation
Installation de béton
Use the wall plate as a template
to mark four holes.
Drill a hole at each marked
location. Insert a concrete anchor
into each hole.
Fix the wall plate onto the wall
using the lag bolts provided.
C/D/E
G
Choose proper screws to fix
the mount to the back of your
display. Spacers and longer
screws should be used if the
back of your display is curved
or recessed.
Take the arms with the TV
Take the arms with the TV mounted and fit
the grooves onto the top ledge of the wall mounted and fit the grooves on
plate. Insert the tightening bolts (F) on the
the top ledge of the wall plate.
bottom and tighten.
Insert the tightening bolts (F) on
the bottom and tighten.
Adjust the tilting screw in the TV
plate to get the best Visual
experience.