Maintenance; Maintenance Inspection - Pressalit SCT 3000 Instrucciones De Uso Y Mantenimiento

Maintenance

Expected service life of the shower table is 10 years for institutional use,
provided that maintenance is carried out as described below:
It is recommended on a weekly basis to run the motors on the product to their
maximum positions by raising the product to its full height, and then lowering
it to its lowest position, so that the internal parts are lubricated .
It is recommended that maintenance inspection is done once a year .

Maintenance inspection

1
2
4
1
3
2
• Check the hinges
table and the safety rail
Tighten if necessary .
• Check the pads
and replace if necessary .
• Check the drain pipe
connections , and check and
④
clean the water trap (if fitted) .
on the
①
.
②
for damage
③
en
19