Cleaning; To Remove Limescale; Maintenance - Pressalit R360085 Instrucciones De Uso Y Mantenimiento

Cleaning

The product is to be cleaned with hot water or a mild soapy cleaning agent.
A list of suitable cleaning agents tested by Pressalit can be found on
pressalit.com.
Always read the material safety data sheet (MSDS) and supplied
instructions of the cleaning, disinfecting or de-scaling agent and comply
with instructions for safe use, dilution, rinsing, drying, handling and
storage of the agent.
• Do not use an autoclave or other type of steam cleaner.
• Avoid aggressive cleaning agents containing acids.
en
• Never spray the product directly with a high pressure cleaner.
• Avoid use of abrasive, corrosive or chlorine-based cleaning or
disinfecting products.

To remove limescale

To remove limescale marks on the aluminium parts, use 3 parts 30%
household vinegar to 7 parts water and afterwards wipe the parts with a cloth
wrung out in clean water .
In countries with relatively high levels of lime in the water supply, it may be
necessary to remove limescale deposits from the aluminium parts using a
de-scaling agent such as acetic acid . Test this first on a area that is not visible
when the product is in use .

Maintenance

Remove dust from the wall mount of the sideways adjustable support arm at
a regular basis . Wipe with lubricant .
Expected service life of the support arm is 10 years .
18
CAUTION
!
IMPORTANT