Panasonic TY-42TM6G Manual De Instrucciones página 7

This Manual describes handling methods when installing this product into displays made by our company, and use
with multiple screens.
The form of the terminal board will differ depending on the size of the display.
Connections
Connect 4 or 9 displays in sequence, as shown in the diagram below.
Example showing connection of four units
First display
SLOT1
To other display
PC cable D-sub 15p
(not supplied)
PC1 IN terminal
IN
PC 1
SLOT1
Notes:
• For connecting between the SERIAL terminal and computer, use a communication cable compatible with your
computer.
• To enable use with multiple screens, multi-screen setting must be performed for each display.
• Read the Operating Instructions supplied with the display for the details.
Signal Names for D-sub 15p Connector
11 12 13 14 15
6 7 8 9 10
1 2 3 4 5
Pin Layout for PC1 Terminal
Signal Names for D-sub 9p Connector
6 7 8 9
1 2 3 4 5
Pin layout for SERIAL OUT Terminal
All manuals and user guides at all-guides.com
PC cable
D-sub 15p
(not supplied)
IN OUT
SERIAL OUT SLOT
PC 1
SLOT2
SERIAL terminal
OUT
SERIAL OUT SLOT
1 2 3
SLOT2 SLOT3
Pin No. Signal Name
1 R (P
2 G(Y)
3 B(P
4 GND (Ground)
5 GND (Ground)
1 NC
2 RXD
3 TXD
Computer
Conversion adapter
(if necessary)
1 2 3
SLOT3
AUDIO
PC IN SERIAL
Pin No. Signal Name
/C ) 6 GND (Ground)
R R
7 GND (Ground)
/C ) 8 GND (Ground)
B B
9 NC (not connected)
GND (Ground)
10
4 Non use
5
6 Non use
RS-232C straight cable
D-sub 9p (not supplied)
AUDIO
PC IN SERIAL
RS-232C cross cable D-sub 9p
(not supplied)
Pin No. Signal Name
11 GND (Ground)
12
13 HD/SYNC
14
15
7
GND 8
9
SDA
VD
SCL
Shorted
NC
7