About Your New Labelmaker
With your new DYMO LabelPoint
can create a wide variety of high-quality, self-adhesive
labels. You can choose to print your labels in many
different sizes and styles. The labelmaker uses DYMO
D1 label cassettes in widths of 1/4" (6 mm), 3/8"
(9 mm), and 1/2" (12 mm). Label cassettes are also
available in a wide range of colors.
Visit www.dymo.com for information on obtaining
labels and accessories for your labelmaker.
Warranty Registration
Please complete the warranty registration card and
return it to the appropriate Customer Support address
within seven days. Visit www.dymo.com/
registration for details or to register online.
Getting Started
Follow these instructions to print your first label.
Connecting the Power
The labelmaker is powered by standard batteries or an
AC power adapter. To save power, the labelmaker will
automatically turn off after two minutes of inactivity.
Inserting the Batteries
The labelmaker uses six AA alkaline batteries.
To insert the batteries
1. Remove the battery compartment cover.
See Figure 2.
All manuals and user guides at all-guides.com
™
250 labelmaker, you
Figure 2
2. Insert the batteries following the polarity markings
(+ and –).
3. Replace the battery compartment cover.
!
Remove the batteries if the labelmaker will not
be used for a long period of time.
Connecting the Power Adapter
An optional AC power adapter can also be used to
power the labelmaker. Connecting the AC adapter to
the labelmaker disconnects the batteries as a power
source.
To connect the power adapter
1. Plug the power adapter into the power connector on
the top of the labelmaker.
2. Plug the other end of the power adapter into a
power outlet.
!
Make sure the labelmaker power is turned off
before you disconnect the power adapter from the
main power source. Otherwise, your most recent
memory settings will be lost.
Inserting the Label Cassette
Your labelmaker comes with one label cassette. Visit
www.dymo.com for information about purchasing
additional label cassettes.
3