All manuals and user guides at all-guides.com
Installation and Operation
4. Press the buttons on the front panel to select the desired computer.
The Select LED will illuminate to indicate which computer is currently
selected. The monitor will show the corresponding image, and the
selected computer can by controlled via keyboard and mouse.
5. The included IR Remote Control works the same as the pushbuttons:
a. For input: 1 specifies PC1, 2 specifies PC2,
b. For loop switching:
6. USB peripherals, such as printers, scanners and thumb drives, can be
connected to the front-panel USB-A ports..
Special Function Operation
1. Mouse Traversal Function – Place the mouse on the far right of the
monitor, and continue to slide it to the right for 2 seconds. The KVM
switch will automatically switch to the next port. Switching order is
PC1 PC2 PC3 PC4 PC1...
2. USB-B Detection Switching Function:
a. a. When the unit detects that a computer is connected to the
USB-B port, the unit immediately switches to that computer, and
the corresponding Online and Select LEDs illuminate. For instance,
if PC1 is already connected, then PC2 becomes
connected via USB-B, the KVM will automatically switch to PC2.
b. b. When the currently selected computer is powered off or the USB
cable is dialed out, and the KVM automatically switches to the next
computer with the power on and the USB port connected
3 specifies PC3 and 4 specifies PC4.
Order is PC1 PC2 PC 3 PC4 PC1....
6