Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
CHANNEL ASSIGNMENT
When using a Digital Audio Workstation on a
PC, and within the included Phonic Firefly 302
Plus control panel software, the following names
have been attributed to the input channels of the
FireWire mixer. They can be altered through the
control panel software included with the mixer.
Firefly Channel
Channel Name
Analog In 1
1/4" and RCA Analog Input 1
Analog In 2
1/4" and RCA Analog Input 2
Mic In
Microphone Input
Mic In
Microphone Input
S/PDIF In
S/PDIF Input
S/PDIF In
S/PDIF Input
Midi In
MIDI Input
To alter an input channel's name on your com-
puter, open the Firefly 302 Plus control panel
software. On the left hand side of the control
panel, users will find the settings categories. By
clicking "Input Channels", the main window will
display the titles input channels. You can then
highlight the channel names and press the "Edit
Channel Name" button on the bottom of the con-
trol window. A new window will appear that will
allow users to adjust the channel name.
If you would like to use the Firefly 302 Plus as
your default audio output device on you PC,
simply go into the Windows control panel, and
select "Sound and Audio Devices". Select the
Audio tab, and use the pull-down menu to se-
lect the Firefly 302 Plus from the list of avail-
able output devices. The Firefly 302 Plus can
also be selected as the default output device for
individual programs by editing said programs'
settings / options.
14
OPERATING
SOFTWARE
After successfully completing the installation pro-
cess, the following process must be followed to
work efficiently with the Firefly 302 Plus mixer.
1. Open the Cubase LE program.
2. Go to the 'Devices' pull-down menu and select
'Device Setup'. On the left, select 'VST Multi-
track'.
3. From the ASIO Driver drop-down list select the
'Phonic ASIO' Driver. A pop-up box will ask
you if you want to switch the ASIO driver. Click
'Switch'. This completes the basic installation
and setup.
4. Activating audio tracks received from the Firefly
mixer.
a. Go to the "devices" pull-down menu and
select 'VST Inputs'. This will display the
various inputs ("Phonic Firefly 302 Ch 1",
"Phonic Firefly 302 Ch 2", etc.)
b. Activate 4 of these channels by clicking the
"Active" button located next to each channel
name. Please note, only 4 input channels
can be activated at any one time. This is a
limitation of Cubase LE, and if more input
channels are needed, we suggest upgrad-
ing to a higher version of Cubase, or use
other DAW software.
5. For further instructions on the operation of Cu-
base, please consult the user manual by press-
ing F1 while the program is open.
If you wish to reset the Firefly 302 ASIO driver, sim-
ply go to the 'devices' pull-down menu and select
'device setup'. Simply click "reset" and select the
"Phonic ASIO Driver". Click 'ok' to continue and
the Firefly 302 Plus should once again become
functional.
WITH
DAW
Firefly 302
Publicidad
Tabla de contenido
