Firewire Interface - Phonic FIREFLY 302 PLUS Manual Del Usuario

FIREWIRE INTERFACE

System Requirements
The following are the minimum required specifications for use with the Firefly. If your computer
does not meet these requirements, you will experience lagging of audio and possible freezing of
your computer when attempting to operate the Firefly.
Windows
• Microsoft® Windows® XP SP1 and SP2
• Available FireWire port
• Intel Pentium® 4 processor or equivalent AMD Athlon processor
• Motherboard with Intel or VIA chipset
• 5400 RPM or faster hard disk drive (7200 RPM or faster with 8 MB cache recommended)
• 256 MB or more of RAM (512 MB recommended)
Macintosh
• OS X 10.3.5 or later with native FireWire support
(OS X 10.4.7 may have some stability issues)
• G4 or newer processor
• 256 MB or more of RAM
Driver Installation
To use the Firefly efficiently (or at all) on a PC, it is important to install all the necessary drivers
from the included CD1 (ASIO and WDM drivers). It is important that users read all instructions
carefully before continuing on to the each step of installation, as users will be required to unplug
and plug in their FireWire device. This is not necessary for Mac users.
Windows XP (with Service Pack 1 or 2)
1. It is recommended that you quit all applications before starting the installation process.
2. Ensure the Firefly is not yet connected to your Computer's FireWire input.
3. Insert the installation CD included with your Firefly into the CD-ROM drive of your computer.
If the CD does not automatically start the installation process within a few moments, then
navigate to "My Computer" g your CD-ROM drive g "Drivers and Control Panel Firefly 302
Plus" g double-click "setup.exe" to begin the installation manually. The Firefly Control Panel
software also will be installed at this time.
4. Follow the on-screen installation instructions.
8
Firefly 302