Decolav 9296 Serie Guia De Inicio Rapido

Product Description - Roughing-in Dimensions
Installation Notes
•
Install Lavatory according to manufacturer's provided installation instructions.
•
Remove Drain Nut and Hard Washer from Drain.
•
Insert Black Washer and Drain into drain hole of Lavatory as shown.
•
Apply Teflon to the exposed male threading of Drain.
•
Place Hard Washer over the exposed male threading of Drain.
•
Thread Drain Nut onto Drain.
•
NOTE: DO NOT OVERTIGHTEN DRAIN!
•
If needed, trim off excess Tailpiece for appropriate length.
•
Apply Teflon to exposed male threading of Tailpiece and tighten.
•
Install waste system.
•
Check for leakage.
Grid Drain
• Parts and Accessories
• Without Overflow
• 1 1/4" (3.175cm) Internal Diameter
• Measurement: 2 1/4" x 9 7/8" (5.715cm x 25.0825cm)
(including tailpiece)
• CSA Certified: CSA B125-01, ASME A112.18.2 - 2002
Customer Service
www.decolav.com
Model Number: 9296 Series
Black Washer
Hard Washer
561-274-2110
2 1/4" [5.715cm]
1 1/2" [3.81cm] - 16UN
1 1/4"
Drain
Drain Nut
Tailpiece
Threaded
[3.175cm]
Lavatory
Countertop