Decolav 9290 Serie Guia De Inicio Rapido

Product Description - Roughing-in Dimensions
Installation Notes
•
Install Lavatory according to manufacturer's provided installation instructions.
•
Remove Drain Nut and Thick Washer from Drain.
•
Insert Drain into drain hole of Lavatory as shown.
•
NOTE: USE OF A NON-CORROSIVE SILICONE SEALANT UNDER
THE FLANGE OF THE DRAIN IS SUGGESTED.
•
Apply Teflon to the exposed male threading of Drain.
•
Place Thick Washer over the exposed male threading of Drain.
•
Thread Drain Nut onto Drain.
•
NOTE: DO NOT OVERTIGHTEN DRAIN!
•
If needed, trim off excess Tailpiece for appropriate length.
•
Apply Teflon to exposed male threading of Tailpiece and tighten.
•
Install waste system.
•
Check for leakage.
Model Number: 9290 Series
Umbrella Drain
• Parts and Accessories
• 1 1/4" (3.175cm) Internal Diameter
• Measurement: 3" x 8 5/8" (7.62cm x 21.90cm)
(including tailpiece)
• CSA Certified: CSA B125-01, ASME A112.18.2 - 2002
• Without Overflow
Customer Service
561-274-2110
www.decolav.com
Thread
O.D.1 5/8" [4.1275cm] x 11TH
Tailpiece
1 1/4" [3.175cm]
Drain
Thick Washer
Drain Nut
3" [7.62cm]
2 1/4" [5.715cm]
Lavatory
Countertop
Tailpiece