Table Of Pictograms Used Introduction; Intended Use - Parkside ULG 17 A1 Instrucciones De Funcionamiento Y De Seguridad

Table of pictograms used / Introduction
Table of pictograms used
Read the operating instructions
of this product attentively and
with care before use.
NOTE: This symbol indicates
additional information and
explanations on the product
and its use.
Caution! Risk of electric shock!
Dispose of the batteries in the
specified battery collection
points.
Suitable for lead-acid battery:
8 Ah – 250 Ah
Only for use in closed,
ventilated rooms!
Packaging material –
corrugated paper
Suitable for motorbikes
Suitable for the charging
of 12-V batteries
Car battery charger & jump
starter ULG 17 A1
z Introduction
Congratulations!
You have purchased one
of our high-quality products.
Please familiarise yourself with the
product before setup or first use. Read
the following original operating and
safety instructions carefully. This product
6 GB/IE/NI/CY/MT
Alternating voltage with
~50 Hz
a frequency of 50 Hz
Caution! Possible risks!
Caution! Explosion hazard!
Protection class IP20:
Protection from the device
housing against touching live
or internal moving parts with
the fingers.
Do not dispose of any
electrical devices in domestic
waste!
Dispose of packaging prop-
erly.
Do not dispose of the device in
household waste!
Suitable for cars
Suitable for the charging
of 6-V batteries
Made from recycling material
must be set up or used only by people who
have been trained to do so.
z Intended use
The Ultimate Speed ULG 17 A1 is a car
battery charger with pulse maintenance
charge (chip software), used for charging
and maintenance charging and suitable
for the following 6 V or 12 V-lead
rechargeable batteries (batteries)
with electrolyte solution, AGM batteries,