Cyberbike™ Mode; Warning - Bigben Interactive Cyberbike Magnetic Edition Manual De Utilización

It is also possible to reprogramme these forward and reverse pedalling actions
(see paragraph 4.a).
4.c.II. Cyberbike™ mode
In Cyberbike™ mode, FORWARD pedalling has the same positive values as the
Y (vertical) direction of the C-Stick on a Gamecube™ controller. The faster you
pedal, the greater the value.
In Cyberbike™ mode, REVERSE pedalling has the same negative values as the
Y (vertical) direction of the C-Stick on a Gamecube™ controller. The faster you
pedal, the greater the negative value.
It is also possible to reprogram these forward and reverse pedalling actions
(see paragraph 4.a).
5. DIAGNOSING ERRORS
The vehicle/character fails to move on the screen when you are pedalling on the
Cyberbike™.
- Check that all cables are properly connected (See p: 5 - 2a - Fig 6).
- Check that the Gamecube™ / Cyberbike™ mode switch is in the desired mode,
it needs to be set to the CB position (See p: 6 - 4c - Fig 11).
The vehicle/character fails to respond when you apply the Cyberbike™ brake.
- Check that all cables are properly connected (See p: 5 - 2a - Fig 6).
- Check that the Gamecube™ / Cyberbike™ mode switch is in the desired mode.
- Ensure that the brake control has not been accidentally reprogrammed.
To cancel all programming and reset to default (See p: 6 - 4c - Fig 11).
The vehicle/character turns, although the handlebars are centred.
- Cancel all programming (See p: 6 - 4a III).
- Restore manufacturer's calibration (See p: 6 - 4b).
The game fails to respond to your Cyberbike™ signals (See Annexe 1 - p: 24).
- Check that all cables are properly connected (See p: 5 - 2a - Fig 6).
- Check that the Cyberbike™ Gamecube connector is properly connected to the
Port 1 controller connector.
The Cyberbike™ is not recognised by the console.
- Ensure that the cable inside the handlebar support is connected
(See p: 5 - 2a - Fig 6).
- Ensure that the cable from the Cyberbike™ is connected to the Wii™console.
It has to be connected to port 1 on the GameCube™ connectors. It will not func-
tion in any other connectors (See p: 5 - 2a - Fig 6).
- Ensure that you have not selected the Wii™ and Nunchuk™ controller option
during set up. You need to select the GameCube™ controller option. If you have
selected the Wii™ controller option, select the options and select the «Choise of
controller» option. You can then select the GameCube™ option.

6.WARNING

1. Read the enclosed instructions carefully before using the product. The product
should only be used as described in these instructions. Keep these instructions in
a safe place.
2. This equipment complies with European standards governing fitness equipment
for non therapeutic, home use.
3. This equipment should be assembled by an adult. Care should always be taken
when assembling and disassembling the Cyberbike™.
4. All small parts and plastic bags should be kept out of reach of children. Ensure
that plastic bags are disposed of appropriately.
5. The equipment owner must ensure that anyone using this product has been infor-
med of all safety measures. Children should be given adequate instructions by an
adult on how to use the equipment. Children should always use the equipment
under adult supervision.
6. Help your child to adjust the handlebar and seat to the correct height.
7. Delta Reference / Bigben Interactive accept no responsibility for any injury or
damage inflicted on any person or any property as a result of improper use of the
product by the purchaser or a third party.
8. Not suitable for children or adults weighing more than 130kg/286lbs.
9. This product is designed for home use only. This product should not be used for
any public, commercial or rental purposes.
10. This product should be used and stored indoors, in a dry, dust-free place, on a
firm, flat surface with ample room for manoeuvre. Ensure that you have adequate
room to access and move around your Cyberbike™ safely. If necessary, a mat
can be placed underneath the Cyberbike™ to protect the floor. Keep all liquids
well away from the equipment to avoid the risk of fire or electrocution.
11. The user is responsible for maintaining the Cyberbike™ in good condition. After
assembly and before each use, check that all parts and fixings are properly se-
cure with no protruding elements. You should regularly check parts and fixings for
signs of wear.
12. The equipment should be protected from bumps and knocks, which could da-
mage your equipment or cause it to malfunction.
13. Should your Cyberbike™ become damaged, stop using the equipment and
contact technical support. See paragraph 7.
14. Never use the Cyberbike™ near stairs, a steep slope, a road, a swimming pool or
water.
15. Shoes should always be worn during use to protect your feet. Avoid wearing bag-
gy, loose fitting clothing that may become caught up in the equipment. Remove
all jewellery before using the equipment.
16. Warning: the flashing LEDs and lights could induce an epileptic fit or loss of
consciousness in a susceptible person. This effect could also be caused by wat-
ching the TV or playing certain games. Those never having previously suffered
from epilepsy may also be at risk. If you or any member of your family has suffered
from similar symptoms to epilepsy in the past, such as a fit or loss of consciousness
when exposed to flashing lights, we would advise you to consult a doctor before
using the Cyberbike™. We advise parents to supervise any children using the Cy-
berbike™. Should either you or your child display any of the following symptoms