Maintenance; Chimney; Cleaning And Other Regular Maintenance Activities - Dovre 2020 Instrucciones De Instalacion Y Uso

Maintenance

Follow the maintenance instructions in this chapter to
keep the appliance in good condition.

Chimney

In many countries, people are legally required to have
their chimney checked and maintained.
At the beginning of the heating season: have the
chimney swept by an expert.
During the heating season and after the chimney
has not been used for a long time: have the
chimney checked for soot deposits.
After the heating season: seal off the chimney with
a ball of paper.
Cleaning and other regular
maintenance activities
Do not clean the appliance when it is still
warm.
Clean the exterior of the appliance with a dry lint-
free cloth.
At the end of the heating season, you can clean the
interior of the appliance thoroughly:
If necessary, first remove the fire-resistant inner
plates. See the chapter "Installation" for
instructions on removing and installing the inner
plates.
If necessary, clean the air supply ducts.
Remove the baffle plate at the top of the appliance
and clean it.
Checking fire-resistant inner plates
The fire-resistant inner plates are consumables and
subject to wear. Check the fire-resistant inner plates
frequently and replace them when necessary.
See the chapter "Installation" for instructions on
removing and installing the inner plates.
The insulating vermiculite inner plates may
develop hairline cracks, but that does not
affect their performance adversely.
16
All manuals and user guides at all-guides.com
Dismantling damper and baffle
plate
Both the damper and the baffle plate can be removed.
To remove the baffle plate, the damper and the
damper rod must first be removed.
1. Open the door of the appliance.
2. Lift the closed damper slightly and slide it above
3. Remove the damper and the damper rod from the
4. Loosen the support by loosening the M8 nut. The
5. Lift the baffle plate on the front side, pull the baffle
Note: To fit the damper and the baffle plate, before
commissioning the appliance, follow the above
instructions in the reverse order.
Cleaning glass
Dirt clings less easily to well-cleaned glass. Proceed
as follows:
1. Remove dust and loose soot with a dry cloth.
2. Clean the glass with stove window cleaner:
3. Clean the glass again with a normal glass cleaning
Cast-iron inner plates go a long way if you
frequently remove the ash that may pile up
behind them. If accumulated ash behind a
cast-iron plate is not removed, the plate cannot
dissipate the heat anymore to its surroundings
and that may cause the plate to warp or crack.
Never use the appliance without the fire-
resistant inner plates.
the baffle plate, so that they are both free.
appliance.
support plate is in the middle against the top plate
of the appliance.
plate forward and take the baffle plate out of the
appliance.
a. Apply stove window cleaner to a kitchen
sponge, rub down the entire glass surface and
give the cleaning agent time to react.
b. Remove the dirt with a moist cloth or kitchen
tissue.
product.
Subject to change because of technical improvements