THERMEx VERTICAL AUTOMATIC Instrucciones De Montaje página 38

38
THERMEX VERTICAL AUTOMATIC
10
Drill the holes and install rawlplugs suitable for
the material into which they are installed.
13
Fix the hood to the wall by mounting the
screws in the locking holes.
16
Place the extraction hose on the hood.
NOTE: This does not apply if the hood is used
for recirculation.
11
x6
Mount the brackets on the duct.
14
x2
Replace the filters inside the hood.
17
Place the duct on the hood.
12
x4
x2
Mount the hood on the bracket.
15
The lid of the hood is closed by activating and
holding down the on/off icon until it closes.
18
Pull up the top part of the duct and secure it to
the uppermost bracket to the duct using two
screws.
M 540211001224082018