Pioneer VSX-520-S Manual De Instrucciones página 254

Symptom
No sound is produced
(power indicator lights red)
Initial sounds of a track
can't be heard.
S-11
Symptom
No sound.
Sound is distorted.
Speakers stop producing
sound suddenly.
14
En
All manuals and user guides at all-guides.com
• Unit has entered standby
mode.
• The audio signal was input
when the unit was in the
standby mode.
• Incorrect connection of
speaker wire.
• Receiver is off.
• Volume control is at zero.
• Extreme signal condition.
• An excessively large signal
was input, resulting in the
operation of the automatic
protection circuit.
Cause
• Turn the Auto Standby
Cause
• Connect correctly.
• Turn on receiver.
• Slowly turn up volume.
• Turn down the receiver's
• Turn the volume down to
Published by Pioneer Corporation.
Copyright © 2010 Pioneer Corporation.
All rights reserved.
Remedy
function OFF.
– When the Auto Standby
function is turned ON, if
no signal (or only a very
weak signal) is input for
a period of about ten
minutes, the power
mode will automatically
change to standby.
– Note that when listening
with the volume set to a
very low level, the Auto
Standby function may
operate, switching the
unit to the standby
mode.
Remedy
output level (volume, bass
control, bass boost) to
lower the level.
resume normal speaker
output.