Care Of The Unit - gc Aadva Lab Scan Manual De Instrucciones

All manuals and user guides at all-guides.com

CARE OF THE UNIT

1. Keep the device dust-free and covered when not in use.
2. The LED in the scan head is not susceptible to damage caused by prolonged use.
The Aadva Lab Scan can be kept running if necessary, but the device can be turned off as an energy-
saving measure.
3. Unplug the device and remove any objects in the scanning tray prior to routine cleaning and maintenance
of the unit.
4. Do not attempt to clean the sensor head inside the casing of the scanner, as this may damage the device.
5. Use a soft cloth moistened with a small amount of water or other detergents used for cleaning computers.
Wipe the cloth on exposed surfaces of the Aadva Lab Scan to remove dust or other particles. Do not use
cleaning sprays on the surface of the scanner.
6. The dental clamps and trays can also be cleaned using a cloth moistened with a small amount of water.
7. While cleaning the device with a moistened cloth, make sure that the capacitors or other electrical parts
of the Aadva Lab Scan do not come into contact with any moisture.
8. Do not place any objects on top of or above the scanner, as this may interfere with the scanning
functionality.
Make sure that no liquids could accidentally spill on the device.
Aadva LAB SCAN from GC
Aadva
Version 1.1 | V4901 | July 2014
®
Lab Scan
21 21