gc Aadva Lab Scan Manual De Instrucciones página 23

An error occurs during the preparation
scan:
The scan wizard shows a red button,
implying that there is no connection
to the device.
During the scan, an error message
appears during scan
triangulation:
The device has completed the scan
but the scanned object appears
incomplete.
The power supply is interrupted
during the scanning procedure.
Aadva LAB SCAN from GC
All manuals and user guides at all-guides.com
Is the USB cable connected to the
Aadva Lab Scan and the workstation?
Is the Aadva Scan switched on?
Has the device completed scanning
data the dental model?
Has the device completed scanning
the dental model?
Aadva
Make sure that the USB cable has been
attached correctly. The Type B end of
the USB cable connects to the Aadva
Lab Scan, while the Type A connector is
inserted into the workstation.
Check to see if the Aadva Lab Scan is
emitting a blue light. Otherwise, turn
the unit on.
Adjust the view of the model. If
necessary, trim or crop any parts of
the initial scan which are not relevant
for the reconstruction type.
Adjust the view of the model. If
necessary, trim or crop any parts of the
initial scan which are not relevant for
the reconstruction type.
Restart the scanner. If necessary reload
the scan profile or setup a new one.
Version 1.1 | V4901 | July 2014
®
Lab Scan
23 23