Basic Operations; Listening To The Music - Sony TA-FE910R Manual De Instrucciones

Basic Operations

Listening to the Music

1
PROTECTION
POWER
g
OFF
A + B
PHONES
z
If POWER is pressed down
(TA-FE510R/FE310R only)
You can turn the amplifier
on and off by pressing
POWER on the remote.
z
To listen through the
headphones
Connect the headphones to
PHONES and set
SPEAKERS to OFF (TA-
FE910R/FE710R/FE610R
only).
z
To listen directly to the
input signal (TA-FE910R/
FE710R/FE610R/FE510R/
FE310R only)
Press SOURCE DIRECT so
that the indicator lights up.
Since the circuits of TONE
controls, BALANCE control,
LOUDNESS button, and
SUBSONIC button (TA-
FE910R/FE710R/FE610R
only) are bypassed, you
cannot adjust bass, treble,
the balance, reinforce the
bass and treble, or reduce
subsonic noise components
while listening to a source
directly.
Note
Avoid high speaker output at
which the sound is distorted.
High-frequency distortion may
damage the tweeters.
SPEAKERS BASS TONE TREBLE BALANCE
A • • •
B
– 10 + 10 – 10 + 10 LEFT RIGHT
1
Press POWER to turn on the amplifier and turn VOLUME fully
counterclockwise to prevent damaging the speakers with
excessive output.
The PROTECTION indicator lights up, then goes off (TA-
FE910R/FE710R/FE610R only).
2
Turn on the programme source you want to listen to.
3
Set INPUT SELECTOR to the respective programme source.
The indicator for the programme source lights up.
To listen to a
Record
Radio broadcast
Compact disc
Source connected to AUX
Source connected to:
—TAPE1/DAT
—TAPE2/MD
4
Start the programme source.
5
Adjust the volume by turning VOLUME.
To
Adjust the bass
Adjust the treble
Adjust the balance
Reinforce the bass and treble at low
listening level
Reduce subsonic noise components
created by warped records, etc.
TAPE1/DAT TAPE2/MD AUX CD TUNER PHONO
INPUT SELECTOR
SUBSONIC
Ø ON ø OFF
SOURCE
LOUDNESS TAPE MONITOR DIRECT
Ø ON ø OFF
SOURCE
TAPE1 TAPE2
0
3
Turn INPUT SELECTOR for
PHONO
TUNER
CD
AUX (unavailable on the TA-FE210)
TAPE1/DAT
TAPE2/MD
Press or turn
BASS
TREBLE
BALANCE
LOUDNESS
SUBSONIC (TA-FE910R/FE710R/FE610R
only)
Basic Operations
VOLUME
EON LINK
10
5
7 EN