Philips S8870 Manual Del Usuario página 26

26
English
Problem
The appliance
does not switch
'on' after charging
The appliance
does not shave as
well as it used to.
Possible cause
The shaving heads
are damaged or
worn.
Hairs or dirt
obstruct the
shaving heads.
Solution
Turn the on/off ring back
and forth, the appliance
should now switch 'on'.
Replace the shaving heads.
Clean the shaving heads in
the regular way (see
'Cleaning and
maintenance') or clean
them thoroughly.
To clean the shaving heads
thoroughly, remove the
shaving heads from the
shaving head holder one
by one (see
'Replacement'). Then
separate the cutter from its
guard and rinse each
matching set under the
tap. After rinsing, place the
cutter back into its
corresponding guard.
Finally, put the shaving
heads back into the
shaving head holder (see
'Replacement').