Bixolon STP-103 Guia De Instalacion página 2

◈ Specifications
Item
Printing Method Thermal Line Printing
Dot Density 203 x 203 Dpi (8 dot/mm)
Printing Width 48mm
Characters per 32 (Font A : 12x24)
line 42 (Font B : 9x24)
Approximately 1.97 inches/sec
Printing Speed
50 mm/sec
*1)
at 25℃/printing duty 12.5%
Receive Buffer
15K bytes
Printer
Size
SMPS Input
100 ~ 240 VAC
Voltage
Temperature
Environmental
Conditions
Humidity
Mechanism
MCBF *2)
Head
Paper Width 58.0±0.5mm
Paper Thickness Paper thickness : 0.062 ~ 0.075 mm
Paper
Roll Diameter Ø60 mm
Inner : Ø12mm (0.47")
Paper Tube
Outer : Ø18mm (0.71")
※ Note
*1) Printing speed may be slower depending on the data transmission
speed and the combination of control commands.
*2) The above values are calculated under printing level 2 with
recommended paper at normal temperature.
The values may vary with environment temperature, printing level,
etc.
◈ Serial(RS-232C) Fixed Interface Model Windows
Driver Installation
1. After running the product installation CD, run the Thermal Printer >
STP-103 > Drivers > Windows Driver > Drivers Folder > Win
STP-103_Vx.x.x.exe file.
2. In the opening installation window, click on Next.
3. In the Ready to Install the Program window, click on Install.
4. In the Select Port Type window, select one Serial Port and click
Next.
5. In the Question window, select Yes and the computer will reboot.
6. After rebooting, open Start > Settings > Printers & Fax > BIXOLON
STP-103 Icon > Right-Click > Properties.
7. In the Properties window, select the Port tab and click on the Port
Settings. Check to see that the information is identical to the self-test
results after installation.
8. In the Properties window, after selecting the General tab, click on
Print Test Page to confirm that printing is normal.
All manuals and user guides at all-guides.com
◈ Parallel (IEEE1284) Fixed Interface Model
Details
1. After running the product installation CD, run the Thermal Printer >
2. In the opening installation window, click on Next.
3. In the Ready to Install the Program window, click on Install.
4. In the Select Port Type window, select one Parallel Port and click
5. In the Question window, select Yes and the computer will reboot.
6. After rebooting, open Start > Settings > Printers & Fax > BIXOLON
7. In the Properties window, after selecting the General tab, click on
5 ~ 40℃ (Operating)
-10 ~ 50℃ (Storage)
◈ WEEE (Waste Electrical and Electric Equipment)
30 ~ 80% RH (Operating)
10 ~ 90% RH (Storage)
30,000,000 line
100km
☎ BIXOLON Co., Ltd.
● Website http://www.bixolon.com
● Headquarters
● U.S. Office
● Europe Office
Windows Driver Installation
STP-103 > Drivers > Windows Driver > Drivers Folder > Win
STP-103_Vx.x.x.exe file.
Next. (Refer to Figure 1.)
STP-103 Icon > Right-Click > Properties.
Print Test Page to confirm that printing is normal.
This marking shown on the product or its literature, indicates that
is should not be disposed with other household wastes at the end
of its working life, To prevent possible harm to the environment
or human health from uncontrolled waste disposal, please
separate this from other types of wastes and recycle it responsibly
to promote the sustainable reuse of material resources. Household
users should contact either the retailer where they purchased this
product, or their local government office, for details of where and
how they can take this item for environmentally safe recycling.
Business users should contact their supplier and check the terms
and conditions of the purchase contract. This product should not
be mixed with other commercial wastes for disposal.
(Add) A-502, Digital Empire, 980-3 Yeongtong-dong,
Yeongtong-gu, Suwon-si, South Korea, 443-813
(Tel) +82-31-218-5531
(Add) 1210 E. 223rd St., #330, Carson, CA 90745
(Tel) +1-858 764 4581
(Add) BIXOLON Europe GmbH, Lindenstrasse 169,
40233 Dusseldorf, Germany
(Tel) +49 (0)211 68 78 54 0