Maytag MLE20PD Instrucciones De Instalación página 25

3. Move hinge to other side. Reinstall 4 screws.
4. Reinstall plug strips on opposite side of the inner door.
5. Check for fingerprints on the glass. Clean if necessary.
Replace the Door Assembly
1. Place the inner door assembly inside the outer door assembly.
2. Reassemble the inner and outer door assemblies with the
6 screws.
All manuals and user guides at all-guides.com
REVERSING DRYER DOOR SWING
Reverse the strike
1. Use a small flat-blade screwdriver to remove plug strip from the
dryer door opening. Slide the head of the screwdriver under the
plugs, without scratching dryer surface, and lift up strip.
2. Remove the strike using a Phillips screwdriver.
3. Insert strike on the opposite side.
Reinstall the door
1. Partially insert the third screw from the top; then slide the
hinge onto this screw while hooking the hinge into the front
panel hole. Reattach door to dryer front panel with the remaining
three screws.
2. Check for fingerprints on the glass. Clean if necessary.
3. Close door and check that it latches securely.
25