Digitus DA-12002 Guía Rápida De Instalación página 3

4. Package Content
• 1 x On-Ear Office Headset with Noise Reduction, 2 x 3.5 mm Stereo
• 1 x QIG
5. Installation
To use the headset, simply connect it to an available audio port on your
computer. Installation on both Windows and Mac operating systems will
be automatic and completed shortly after connecting the headset. Once
the installation is complete, you can verify that the headset is ready to
use by following these steps:
Windows
Go to Control Panel > Sound and check that the PnP Sound Device is set
as the default device in both the Playback and Recording tabs.
macOS
Go to System Preferences > Sound and check that PnP Sound Device is
set as the default device in both the Input and Output tabs.
The headset can control the output volume of your computer using the
volume up and down buttons and can completely mute audio output via
the headphone mute button. It is possible to monitor the level that the
computer is set to by hovering the mouse over the speaker icon in the
system tray in Windows, whilst macOS will show the volume adjustment
on screen with each button press. It is also possible to mute just the
microphone by using the microphone mute button. A red LED will
illuminate on the controller to signify that the microphone is muted.
Under normal operation the green LED will flash, if it is permanently lit
please adjust the microphone level:
Windows > Control Panel > Sound > Recording > PnP Sound Device >
Properties > Levels
macOS > System Preferences > Sound > Input > PnP Sound Device >
Input Volume
3