Temperature Settings - Hansgrohe RainBrain 15841 Serie Modo De Empleo

Temperature setting
Temperature setting using the control dial:
You can set the desired shower temperature using the control dial.
Turn the dial to the left to lower the temperature.
Turn the dial to the right to raise the temperature.
The temperature changes in 0.5 °C or in 1 °F steps per "click" of the
control dial.
After entering a new temperature a wave animation immediately appears
above the digit. It disappears after the desired temperature is reached (ill.
3).
On the basis of the digit on the display you can determine what
temperature has been set.
Temperature setting by tapping the digit on the display:
Tap the number on the display.
A temperature bar opens (ill. 1).
By tapping + and - you can change the temperature in 0.5 °C or 1°F
steps.
Confi rm the desired temperatur with OK (ill. 2) or by pressing the digits.
If you do not confi rm the temperatire, the bar disappears after 3 seconds.
After entering a new temperature a wave animation immediately appears
above the digit. It disappears after the desired temperature is reached (ill.
3).
Generally the temperature can be selected within the range of 5 °C to 60
°C / 41 °F to 140 °F.
A standard scalding protection is set at 42 °C / 108 °F. A warning
window appears (ill. 4) if a temperature above this value is set.
You can bypass the scalding protection in this window by pressing Yes,
or you can close the window by presisng No. The window automatically
closes after 3 seconds if nothign is entered.
You can raise the temperature to 60 °C / 140 °F if the scalding protection
is switched off by pressing Yes.
The sensitivity of the temperature increase is now lower. For every 0.5 °C
the control dial must be turned 4 "clicks".
1
38,
Temperature
OK
Operating instructions
°C
5
Menu
English:
2
Temperature
OK
3
OK
4
Scalding protection
Switch off scalding protection?
Yes
°C
34,
0
Menu
°C
34,
0
Menu
Scalding protection!
°C
42,
0
No
47