Warranty - ICC RONER 80013 Manual De Instrucciones

INSTRUCTION MANUAL
J
.P. SELECTA s.a.u.
CODE 80300 REV C
9.1 Reset for overtemperature
The equipment has a separate safety device to prevent that the heating element tem-
perature rises uncontrolled, for example, when it runs out of water.
In that case, the mechanism disconnects the heating element power and, once cooled,
it must be reset in order to continue using the computer.
Press the reset button on the back side of the computer.
9.2 Setting the «Offset» temperature reading
The offset (A) and the ºC/ºF unit (B) can be adjusted.
A. Adjust the probe reading correction (offset)
Press keys (2) and (3) continuously and at the same time (about 5 seconds).
The OFFs message will appear.
Use keys (2) / (3) to set the actual temperature reading value. Press key (1)
to confirm.
B. Presentation unit: ºC / ºF
Press keys (2) and (3) continuously and at the same time (about 5 seconds).
The OFFs message will appear.
Press the key (4). The message Unit will appear. Using keys (2) / (3), select the
unit: ºC / ºF. Confirm with key (1).

10 WARRANTY

This product is guaranteed for one year. It does not cover damages caused by an incorrect
use or causes beyond the control of ICC.
Any manipulation of the equipment by personnel not authorized by ICC automatically
cancels the guarantee.
Autovía A-2 Km 585.1 Abrera 08630 (Barcelona) España
e-mail: selecta@jpselecta.es - website: http://www.jpselecta.es
ABRIL 2019 (It can be modified without notice) Page: 10
Tel 34 937 700 877 Fax 34 937 702 362