Publicidad
Idiomas disponibles
Idiomas disponibles
Advice for use and care:
Ensure the scale is on a flat, even and firm surface. Avoid carpet or soft surfaces.
Always weigh yourself with the same scale placed on the same surface. Uneven floors may
affect the reading.
The surface of the scale will be slippery if wet. Keep it dry!
Weigh yourself without clothing and footwear, before meals and always at the same time of
day. Keep the scale in a dry place to protect the electronic components.
Clean after use with a lightly damp cloth, do not use solvents or immerse the product in
water. Avoid overloading the scale, otherwise, permanent damage may occur.
A user who has any metal material inserted into his/her body may get differences in
measurement of body fat reading. Pacemaker users are advised against using this device.
The scale is designed for household use only, not to be used for commercial purposes.
Weighing operation:
1. Remove the insulation tab from the battery contacts before use.
2. Select the weighing mode using the switch (Kg/St/Lb) located on the back of the scale.
3. Step on the scale platform to switch on the product, stand still while the scale computes
your weight.
4. Your weight will be displayed and fixed.
5. When you step off the scale it will automatically switch off after 6 seconds.
6. If no weighing is carried out while 0.0 is displayed the scale will automatically switch off
after 6 seconds.
Remarks: This initialization process as below must be repeated if the scale is moved. At all
other times step straight on the scale.
• Step 1: Press the platform centre and remove your foot.
• Step 2: "0.0" will be displayed.
• Step 3: The scale will switch off and now it is ready for use.
Body fat measurement:
In order to ensure accurate results users should enter the required personal parameters: age,
sex and height.
These scale has the facility to store the personal parameters of 10 people.
The technology used in these scale, bio-electrical impedance analysis (BIA) is more
technologically advanced than the older Body Mass Index (BMI) method where fat % is
calculated using only height and weight. BIA technology uses 5 parameters to get a more
accurate resolution for the analysis (weight and biological resistance which are automatically
measured by the scale together with the three personal parameters entered manually).
Mode selection and parameter setting:
Press and hold to switch on/switch off the scale.
Press A or V to switch between body parameter 0–9. Press * to confirm.
Press A or V to select male or female. Press * to confirm.
Press A or V to indicate height. Press * to confirm.
Press A or V to indicate age. Press * to confirm.
2
ENGLISH
Publicidad
