Product Accessories; Power On/Off; Video Recording - Wiseup PBC200 Guia Del Usuario

2. Product Accessories

USB Cable
3. Operation
>> Please make sure your camera is fully charged before using.

1) POWER ON/OFF

(1) Power on the camera by holding down the Power On/Off Button for 2
seconds and the camera will enter into standby mode automatically. Both the
blue and yellow indicator lights are on. 3 seconds later, the yellow indicator
light will be turned off and the blue indicator light will be on.
(2) Power off the camera by holding down the Power On/Off Button for 2
seconds. Both the yellow indicator light and the blue indicator lights will flash
three times and then be turned off.
(3) The camera will shut down automatically in 3 minutes if the camera is in
standby mode without any operation.

2). VIDEO RECORDING

(1) Power on the camera by holding down the Power On/Off Button for 2
seconds and the camera will enter into standby mode automatically. Both the
blue and yellow indicator lights are on. 3 seconds later, the yellow indicator
light will be turned off and the blue indicator light will be on.
(2) Press the Power On/Off Button once, the blue indicator light will flash three
times and then be turned off. Now the camera is recording video.
(3) Press the Power On/Off Button again to stop video recording. The blue
indicator light will be on. The camera enters into standby mode.
(4) Press the Power On/Off Button to resume video recording.
Attention:
1 .Video files will be saved automatically every 10 minutes.
2. The camera will automatically delete the first video it has recorded to make space for
the next video when the memory is full.
3. Video Format: AVI
Video Resolutions: 1920*1080