Two mono output.
Handle two speaker boxes 8 Ohm.
4. - Stereo input(CD,tapes etc.)
Two RCA connector style.
High impedance stereo input.
5. - AC power conector.
Standard IEC connector.
110V - 220V,(Switchable)
6.- Fuse holder
2 amp (110 V).
1 amp (220 V). `
7. Voltage selector
Selectin between 110V / 220 V 1ts.
CAPABILITY
100 W @ 4 Ohm, two speaker output (8 ohm).
4 channcl balance or unbalance input.
XLR or 1/4" connector type on each channel.
15V phantom power.
Volume control,tow band equalizer per channel.
Built in Digital Delay Effect on each channel.
Independent Stereo input,RCA connector style for (CD,Tape deck,etc.)
Send and return effects loop.
Master volume control.
CD/Tape volume control.
Delay,Depth and Volume control for Digital Delay effect.
SPECIFICATIONS
Output Power
Frequency Response:
Total Harmonic Distortion(THD)+Noise:
Inputs(max,sensitivity / Impedance):
Output(max,out / Impedance):
Power Supply:
Fuse:
Dimensiones:
Weight:
100 W at 4 ohm
30Hz. - 16Khz +/-3dB
< 0.85.
4 X MIC: 6 mV / 1 Kohms..
4 X Line: 60 mV / 15 Kohms.
1 X Return: 800 mV / 15 Kohms.
2 X CD/ TAPE: 300 mV / 25 Kohms.
1 X Send: 850 mV / 100 K 1 V (60 Hz).
110 / 220 V(Switchable)
2 amp. (115 V) / 1 amp. (230 V)
48 X 26,5 X 28 cm
8 Kg