Unpacking And Setting Up - Silvercrest MONSIEUR CUISINE Instrucciones De Servicio

All manuals and user guides at all-guides.com
RP93471 Küchenmaschine mit Heizung LB5 Seite 84 Donnerstag, 14. August 2014 3:36 15
• Never use the mixer attachment 22 and
blender jug 6 while empty. This might
cause the motor to overheat.
• The mixer attachment 22 may be used
only at speeds 1 to 4.
• The pulse button may not be used
together with the mixer attachment 22.
• Never use the blender jug 6 without the
lid 25 in place, as liquid might otherwise
be thrown out.
• Do not move the appliance while food
or dough is still inside.
• Do not overfill the blender jug 6 as the
contents might otherwise be thrown out.
Overflowing liquid will run onto the

5. Unpacking and setting up

A number of individual parts are given a
protective film of grease In production.
When you use the appliance for the first
time, run it without any foodstuffs to allow
such residues to evaporate.
Note: When you use the appliance for the
first time you may notice a slight odour as
the motor becomes hot. This is harmless.
Make sure the room is adequately
ventilated.
1. Remove the individual parts from their
packaging.
2. Check that the individual parts are all
present (see "1.2 Contents of package"
on page 80) and are undamaged.
3. Clean the appliance thoroughly before
using it for the first
"10. Cleaning and maintaining the
appliance" on page 96).
4. Always place the appliance on a level,
dry, non-slip waterproof surface to
prevent it tipping over or sliding off.
84
underlay, which is why this needs to be
waterproof.
• When steaming, make sure there is
never too much or too little water in the
appliance.
• Do not place the appliance immediately
underneath a suspended cupboard, as
steam escapes upwards and might
damage your furniture.
• Use only clean drinking water to
generate steam.
• The manufacturer and importer accept
no liability for damage caused by an
inadequate power supply or improper
electrical installation in your building. If
in doubt, consult a qualified electrician.
Caution! Overflowing liquid will run
onto the underlay, which is why this
needs to be waterproof.
The appliance is now ready to use.
time (see