General Information - EPTA IARP GLEE X-SLIM NV Manual Del Usuario

Modello - Modèle - Model
Modell - Modelo
Fabbricante - Constructeur
Manufacturer - Hersteller
Fabricante
3. ENVIRONMENTAL PROTECTION AND REQUIREMENTS FOR
WASTE DISPOSAL AND TREATMENT
IMPORTANT INFORMATION FOR CORRECT DISPOSAL OF THE PRODUCT IN ACCORDANCE WITH
EC DIRECTIVE 2012/19/UE
For reasons connected with the safeguard of the environment, and in compliance with what Directive 2011/65/EC and the relevant local
national laws that establish, the cabinets for refrigerated products and frozens must be disposed of and recycled at the end of their life
cycle. Making sure that this is achieved, the user significantly helps prevent potential repercussions on the environment and on the public
health. Cabinets including a refrigerating circuit and a power plug (therefore ready to be installed) are defined WEEE: "Waste Electrical and
Electronic Equipment".
Certain requirements concerning their treatment at the end of their life cycle must therefore be complied with:
• Deliver the cabinets to the appropriate centres specialising in WEEE recovery and recycling.
• Alternatively, return the cabinets to the seller or to the manufacturer.
• At any rate, collection of WEEE to be processed must be made following criteria that guarantee the protection of the cast-off appliances
during transportation and during their loading and unloading. Do not leave the appliances unattended, not even for a few days.
• Avoid damaging the refrigeration circuit, as this contains fluids that may potentialy be hazardous for the environment and are subject
to special prescriptions.
• Make sure that doors are closed and fasten mobile parts accordingly.
• Remove the power plug from the cast-off appliances and cut off their power cord in order for them to become unusable.
The symbol appearing on the rating plate of the appliance and on the documents attached indicates that:
• the product was issued after August 13, 2005;
• the product is subject to "separate collection", and must not be treated as household waste and cannot be delivered at a landfill.
For further details on treatment, recovery and recycling of this product, contact the relevant local office, the household waste collection
service or the seller that has sold the product.
WE DECLARE THAT THE CABINET IS CONFORMING TO RoHS 2011/65/EC DIRECTIVE.
The cabinet contains oil, inflammable cooling gas, plastic and metallic components and glass.
WARNING! Polyurethane insulation uses CICLOPENTHANE as expander, that doesn't affect the environment but
is inflammable. To guarantee the same respect when it's disposed of , never abandon the equipment outside.
Don't throw the packaging material from your equipment in the rubbish but sort the various materials: eg.polystyrene,
cardboard, plastic bags. The demolition of the cabinet and the recovery of the component materials must be
carried out according to the local regulations in force in this matter.
WARNING! For out of use equipment:
• Disconnect the power supply plug.
• Remove the power supply cable and eliminate it together with the plug.
• Do not remove the drawers and various components inside the tank, to make it more difficult for children to
enter the refrigerated chamber of the equipment.
• Children are forbidden from playing with the decommissioned equipment. Danger of suffocation!
The equipment contains flammable gas inside the refrigeration circuit which must be appropriately
disposed. You need to avoid damaging the refrigerating circuit when dismantling the equipment.
10
cm
10
GLEE X-SLIM NV
EPTA S.p.A. - Sede legale
Via Mecenate, 86 - 20138 Milano – Italy
Capitale € 68.515.000 - R.E.A./MI – 1730229
Registro delle Imprese e Cod.Fiscale n. 04160730968
Partita IVA 04160730968
4.

GENERAL INFORMATION

Take out packaging and clean all the cabinet using warm water together with 5% of neutral soap then
dry it with a soft cloth; for the glass parts only use specific products, avoiding the use of water which
can leave on the glasses limestone residues.
It is fundamental to comply with the distances indicated (cm) for correct
installation of the equipment.
• It is necessary that the capacitor unit is in the free air exchange condition, therefore the ventilation
zones must not be obstructed by boxes or otherwise.
• Install and position the unit in such a way so as to allow easy access to the power socket.
• Never place containers of liquid on or immediately above the ticket counter; should the content
spill out, it would damage the counter.
• The measured sound pressure emanated A is below 70dB (A).
cm
1 4 / 5 6
PAGE
UM000543
N° DOC