BGS technic 6685 Manual Del Usuario página 5

SAFETY INFORMATIONS
•
This manual serves as a brief guide and does not replace a workshop manual. Always refer to
the vehicle-specific service literature, particularly the technical data such as torque values and
instructions for disassembly/assembly, etc.
•
After repair or before starting the engine, turn a minimum of 2 turns by hand and check the
timing again.
•
Turn the engine only in the normal direction of rotation (clockwise unless otherwise specified)
USE
Camshaft Alignment Tool (1),
to be used as OEM 11 8 760
Crankshaft Holding Tool (2),
to be used as OEM 2 357 904
Flywheel Timing Pin (3),
to be used as OEM 2 288 380
Drive Plate Timing Pin Adaptor (4),
to be used as OEM 2 365 488
Fuel Pump Sprocket Removal Tool (5),
to be used as OEM 11 8 030
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed