Dorman 576-594 Instrucciones De Instalación página 3

PLEASE NOTE: The O-ring found in the Installation
Kit must be used to replace OE O-ring.
Ensure that flange area is greased
for easy installation.
Place the sending unit securely into the opening
before turning it into place. There should be no gap
between the unit and tank.
Disclaimer: Even though every attempt is made to ensure this information is complete and accurate, it is impossible to account for all possible circumstances or situations. Please consult with a
qualified auto technician before attempting to perform any work you are not qualified to do. Automobiles can be hazardous to work on; be sure to take all necessary safety precautions. Failure to do so
may result in property damage or personal injury. Certain motor vehicle standards and performance requirements may apply to your motor vehicle (such as Federal Motor Vehicle Safety Standards by
the National Highway Traffic Safety Administration). Be sure that your work is performed in accordance with such standards and that you do not disable any motor vehicle safety feature.
Dorman Products, Inc. | Corporate Office and Customer Service: 1-800-523-2492 | Tech Line: 1-866-933-2911
©2021 No reproduction in whole or in part without prior written approval.
REMOVAL/INSTALLATION INSTRUCTIONS:
576-594 FUEL TANK
O-ring in
installation kit.
DO NOT USE
OE O-RING.
Correct
Incorrect.
Gap!
3
576-594_Instructions