10
❖
Always make sure the drive and AC adaptor have
adequate ventilation and are protected from
overheating when the AC adaptor is connected to
a power outlet. Inadequate ventilation may cause
the drive and AC adaptor to overheat resulting in
a fire or electric shock and serious injury.
❖
If dust gets on the power plug connectors or
connector base, turn the power off and
disconnect the power plug. Then clean the
connector and/or connector base with a dry soft
cloth. Failure to do so may cause a fire or electric
shock, possibly resulting in serious injury.
❖
Avoid extended contact between the drive and
your skin. The drive may become hot! Avoid
prolonged contact to prevent skin irritation and/or
heat injury.
❖
Never pull on a power cord/cable to remove a
plug from a socket. Always grasp the plug
directly.
❖
Do not place the drive on a shaky table, uneven,
tilted surface or other unstable location. The drive
may fall, causing damage to the drive or possibly
injury.
❖
Do not disconnect the USB cable and AC
adaptor while operating, as it may result in loss of
data or damage to the drive.
❖
Do not touch the USB cable and AC adaptor
while operating, as it may result in loss of data or
damage to the drive.
❖
Do not bump, drop or jar the drive, as it may
result in loss of data or damage to the drive.
❖
Do not use the drive at high or low temperatures
or sudden temperature changes. This may result
in loss of data or damage to the drive. (Operating:
5° C-35° C).
❖
Do not cover the drive during operation, as it may
become overheated.