Publicidad
Enlaces rápidos
AUTOMOTIVE PRODUCTS, INC.
MOUNT KIT
EQUIPO DE MONTAJE
TROUSSE DE MONTAGE
22-1665
CHROME/CROMADO/CHROME
22-0020, 22-0040
BLACK/NEGRO/NOIR
22-0025, 22-0045
ITEM
QTY
1,2
2
STEP BAR, PASSENGER (1) AND DRIVER (2) (SOLD SEPARATELY)
3
2
FRONT BRACKET
4
2
FRONT/CENTER BRACKET
5
2
REAR/CENTER BRACKET
6
2
REAR BRACKET
7
16
M8-1.25 X 30MM HEX HEAD BOLT
8
16
3/8" FLAT WASHER
9
16
3/8" LOCK WASHER
10
16
1/4-20 X .75 T-HEAD BOLT
11
16
1/4" FLAT WASHER
12
16
1/4-20 NYLON INSERT LOCK NUT
1,2
2
ESTRIBOS, ACOMPAÑANTE (1) CONDUCTOR (2) (SE COMPRA SEPARADO)
3
2
SOPORTE DELANTERAS
4
2
SOPORTE DELANTERAS
5
2
SOPORTE TRASERAS
6
2
SOPORTE TRASERAS
7
16
PERNOS CON CABEZA HEXAGONAL M8-1,25 X 30MM
8
16
ARANDELAS PLANAS DE 3/8
9
16
ARANDELAS DE PRESIÓN DE 3/8
10
8
PERNOS CON CABEZA EN T DE 1/4-20 X .75"
11
8
ARANDELAS PLANAS DE 1/4"
12
8
TUERCA DE FIJACIÓN HEXAGONAL 1/4-20
1,2
2
MARCHE-PIEDS, PASSAGER (1) ET CONDUCTEUR (2) (ACHETE
SEPAREMENT)
3
2
SUPPORT AVANT
4
2
SUPPORT AVANT/CENTRAL
5
2
SUPPORTS ARRIERE/CENTRAL
6
2
SUPPORTS ARRIERE
7
16
BOULON A TETE HEXAGONALE M8-1,25 X 30 MM
8
16
RONDELLE PLATE 3/8"
9
16
RONDELLE A FREIN DE 3/8"
10
8
BOULONS A TETE-T 1/4-20 X .75 PO
11
8
RONDELLES PLATES 1/4 PO
12
8
1/4-20 ÉCROU DE BLOCAGE SIX PANS
Remove the contents from box and check for damage. Verify all parts are present. Read instructions
STEP 1.
completely before beginning.
Determine front, front center, rear center and rear brackets. Rear/center bracket has 1 identification hole
STEP 2.
and rear bracket has 2 identification holes.
Attach drivers side brackets to underside of body panel using two M8-1.25 x 30mm hex head bolts, 3/8"
STEP 3.
flat washers, and 3/8" lock washers per bracket. Hand tighten. SEE FIGURE 1.
Slide T-head bolts on step bar as shown (4 per slot, 8 per bar). Place step bar on saddle with long step
STEP 4.
pad forward and end cap screw facing inward. Assemble with 1/4" fasteners. SEE FIGURES 2 AND 3.
Make sure step bar and brackets are properly
STEP 5.
Recommended torque values are
Repeat installation for passenger side.
STEP 6.
INSTRUCTIONS-INSTRUCCIONES-CONSIGNES
APPLICATION: 2007-08 TOYOTA TUNDRA D-CAB & CREW MAX
APLICACIÓN: TOYOTA TACOMA D-CAB & CABINA MÁXIMO , MOD. 2007-08
APPLICATION: TOYOTA TACOMA D-CAB & CABINE MAXIMUM, 2007-08
1
CONTENTS - CONTENIDO - CONTENU
/CENTRAL
/CENTRAL
"
"
8mm fasteners to 22 FT.LBS. and 1/4" fasteners to 7 FT. LBS.
2
aligned with vehicle and tighten fasteners.
WO:
3
4
TOOLS - HERRAMIENTA - OUTILS
13MM SOCKET
13MM WRENCH
7/16" SOCKET
RATCHET
TORQUE WRENCH
DADO DE 10MM
LLAVE DE TUERCAS 13 MM
DADO DE 7/16"
MANERAL
LLAVE DE TORQUE
DOUILLE 13MM
CLE 13MM
DOUILLE 7/16 PO
CLIQUET
CLE DE COUPLE
75-0764 REVISION B 10/30/08
5
6
Publicidad
Manuales relacionados para Westin 22-1665
Resumen de contenidos para Westin 22-1665
- Página 1 APLICACIÓN: TOYOTA TACOMA D-CAB & CABINA MÁXIMO , MOD. 2007-08 APPLICATION: TOYOTA TACOMA D-CAB & CABINE MAXIMUM, 2007-08 AUTOMOTIVE PRODUCTS, INC. MOUNT KIT EQUIPO DE MONTAJE TROUSSE DE MONTAGE 22-1665 CHROME/CROMADO/CHROME 22-0020, 22-0040 BLACK/NEGRO/NOIR 22-0025, 22-0045 ITEM CONTENTS - CONTENIDO - CONTENU...
- Página 2 FINISH PROTECTION Westin products have a high quality finish that must be cared for like any other exposed finish on the vehicle. Protect the finish with a non-abrasive automotive wax, (e.g. Pure Carnauba) on a regular basis. The use of any soap, polish or wax that contains an abrasive is detrimental, as the compounds scratch the finish and open it to corrosion.
- Página 3 10 10 11 11 12 12 FIGURE 2 FIGURE 3 FIGURA 2 FIGURA 3 Thank You for choosing Westin products Westin Automotive Products, Inc. For additional installation assistance please call 5200 N. Irwindale Ave. Suite 220 Irwindale, Ca. 91706 Customer service (800) 793-7846 or (507) 375-3559...