Using Movepower; Charging The Battery - Dometic MovePower MVP360 Instrucciones De Uso

Using MovePower

8 Using MovePower
NOTE
I
Observe the following information to achieve an optimum service
life of the battery.
 Never discharge the battery fully.
 The battery should be discharged and charged regularly.
8.1

Charging the battery

NOTICE! Beware of damage
A
Only charge the battery using the IU0U automatic charger
PerfectCharge IU812 supplied. A device with the incorrect charg-
ing characteristics will damage the battery.
NOTE
I
Observe the operating manual of the IU0U automatic
PerfectCharge IU812.
➤ Insert the two-pin plug on the charging cable into the "Charge" socket.
➤ Secure the plug by tightening the union nut.
➤ Connect the charging unit to a mains voltage of 230 V.
✓ The battery is charged.
A discharged battery is completely charged in roughly 5 hours.
8.2 Connecting the consumer unit
NOTICE! Beware of damage
A
Only connect consumer units which require a supply voltage of
12 Vg.
Connecting the parking assistance
NOTICE! Beware of damage
A
Before connecting to MovePower, the parking assistance must be
protected by an appropriate fuse.
Observe the information in the manufacturer's instructions for the
parking assistance.
22
MovePower MVP360
EN