Emergency Stop Switch - VATECH PaX-i PLUS PCH-30CS Manual Del Usuario

1.2

Emergency Stop Switch

During operation, the following emergency situations may occur:
X-ray emission even after the Exposure Switch has been released

Physical injury to the patient or damage to the equipment

Other emergency situations

If a problem occurs during image acquisition, press the red Emergency Stop Switch
to immediately stop the moving parts and cut off all power to the equipment's electrical
components. To restart the equipment, turn the Emergency Stop Switch clockwise
until it pops up.
The Emergency Stop Switch is located under the bottom of the Vertical Frame.
PaX-i Plus User Manual
1. Imaging System Overview
5