function. The blue indicator light will stay illuminated, indicating the camera is
back to standby mode.
6. NIGHT VISION
Press the Night Vision Button to enable the night vision function. Press it again
to disable the night vision function.
IV. UPLOAD VIDEO/PHOTO/AUIDO FILES
1. When the camera is powered off, remove the Micro SD card from the
camera and insert it into a card reader.
2. Insert the card reader into a computer
3. The Micro SD card will be recognized as a removable disk drive.
4. All the files can be accessed in the "DCIM" folder.
V. SYSTEM SETTING
>> Follow the steps below to change the system settings:
1. Insert a Micro SD card into the camera.
2. Power on the camera and a file "SETTING.TXT" will be automatically
generated in the Micro SD card.
3. Power off the camera. Remove the Micro SD card from the camera and
insert it into a card reader.
4. Insert the card reader into a computer. Removable disk drive will appear.
5. Locate the "SETTING.TXT" file in the drive and open it to set up the desired
parameters according to the pictures below. Save the changes.
6. Restart the camera and the system will upgrade the program automatically.
[Note]:
Below is two screenshots of parameters setting in the SETTING.TXT file:
(Default)