KALLISTA P74010 Guia De Instalacion página 6

Install the Console Top (cont.)
Partially unthread both leg foot anchors (counterclockwise)
located on the bottom of the legs.
Install one leg, making sure the recess for the towel bar faces the
wall and the mounting position of the second leg.
Slip-fit the leg into the recess in the bottom of the console table
and position the foot anchor into the drilled hole on the floor.
Install the front towel bar to the leg by sliding the end of the
towel bar into the recess on the leg.
Install the second leg, making sure the recess for the towel bar
faces the wall and the first leg.
Slip-fit the second leg into the recess in the bottom of the console
table and position the foot anchor into the drilled hole on the
floor.
Slide the other end of the towel bar into the recess on the second
leg.
Optional: Apply silicone sealant where the legs meet the console
table to stabilize.
Hold one end of each side towel bar in the recess on the legs.
Align the other end of the side towel bar and attach to the
brackets mounted on the wall.
Connect the water supply and check for leaks.
1021663-2-A 6 Kallista