Tabla de contenido
Publicidad
SETUP & USE: (continued ):
Pairing Monitor and Camera:
The handheld unit and the camera are paired at the factory for privacy reasons. If the handheld unit and camera are
not paired with each other for any reason, follow steps below to pair:
Step 1: Move the handheld unit to the same location as the camera.
Step 2: With both the handheld unit and camera powered on, press the POWER/MENU button.
Step 3: Using the "up" scroll arrow, select "ADD CAM" (
selection screen will appear (
2 3 4). The next available camera will automatically be highlighted. Press the
"OK/ZOOM" button to begin pairing.
Step 4: Within 20 seconds, press the CODE button once on the back of the camera. The green power LED on
the camera will begin to flash.
Step 5: Once successfully paired, the green power LED will stop flashing and video will appear on the monitor
screen.
If this is unsuccessful, you should repeat steps above making sure the camera and monitor
are close enough to each other.
SPECIAL FEATURES:
• Wide angle lens technology: Innovative wide angle lens technology delivers a view with 4-times more of
the room visible. This technology enables parents to monitor more of the baby's environment and is especially
beneficial for parents monitoring babies and toddlers as they start to move around in their cot or bedroom.
• Temperature: The temperature of the baby's room (in deg C) is displayed in the top left of the screen. Switch
between Fahrenheit and Celsius by pressing and holding the "OK/ZOOM" button for 3 seconds.
• Digital zoom: The zoom option enables you to get a closer view on screen. Pressing the zoom button once
will move the image on the monitor screen to 2x normal view. Pressing the button again returns the image to
normal view.
• Two-way communication: Press and hold the ( ) button on the left side of the monitor to activate
two-way communication with your baby via the camera unit.
• Night Vision: The camera's infrared LED's enable automatic black and white night vision for monitoring in
low-light and dark rooms.
• Adjustable volume & brightness: Use the volume control buttons on the top of the monitor to adjust
the sound to the desired level. The scrolling controls on the right hand side of the monitor can be used to adjust
the screen brightness, to suit the ambient light level within the room.
• Sound Lights: The 5 sound activated LED lights will illuminate on the video unit depending on the level of
baby's sounds. This feature is particularly helpful if there is a lot of noise in the room where the parent is located.
• Power Save Mode: While operating on battery power, the video screen will go to sleep, to conserve battery
power. Audio and sound lights continue to function normally. With one touch of the video on/off button, video
resumes on screen. Video sleep mode is not available when using AC adapter.
• Video On-Off Button: This button turns the video mode on from video sleep mode. It is ideal for a quick
view of baby in the middle of the night. To monitor in audio only mode press the quick view button again to turn
the video screen off.
• Kick Stand: Flip out the kick-stand and place the monitor on a stable, level surface.
All manuals and user guides at all-guides.com
) and press the "OK/ZOOM" button. A camera
(
(
(
(
EN301 489-17 V2.2.1(2012-09)
EN60950-1 2006+A11 2009+A1 2010+A12 2011
EN300 328 V1.7.1(2006-10)
.
2006/95/EC
1995/5/EC
Summer Infant, Inc.
1275 Park East Drive
Woonsocket, RI 02895 USA
1-800-268-6237
© 2014 Summer Infant, Inc.
(
)
)
/
)
Quick View/Video On/Off
/
)
.
)
/
.
29006
EN62311:2008
EN301 489-1 V1.9.2(2011-09)
Summer Infant Europe, LTD.
First Floor, North Wing
Focus 31, Cleveland Road
Hemel Hempstead, HP2 7BW UK
+44 (0) 1442 505000
customerserviceuk@summerinfant.com
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
2014
1
03/14
Publicidad
Tabla de contenido
