Publicidad
Idiomas disponibles
Idiomas disponibles
DATA SHEET / DATENBLATT
U.I. Lapp
GmbH
Product Management
www.lappautomation.com
PN 0486/01_03.10
21700536, ED-CAN-90-PG
•
With additional 24 V DC
output to supply external
devices (GND = pin 6, CAN
V+ = pin 9)
•
Cost-saving due to quick
installation
•
Easy to connect
•
Standardised interfaces
•
Small design
•
Screw termination
•
Adjustable termination resi-
stor is integrated
•
The integrated, connectable
terminal resistors
enable the CAN-Bus to be
terminated
or connected through
•
When used as a through
connector, the switch must
be in the „OFF" position. If
used as a terminating con-
nector, the switch must be
in the „ON" position.
•
No loose parts
Document:
DB21700536_00EN
©2010 Lapp Group - Technical changes reserved
21700536
valid from / gültig ab: 20.02.2012
2 / 2
Publicidad
