Care And Maintenance - Frigidaire FRP029GBIS Manual De Instrucciones

Changing the inner light
Before removing the inner light, turn off the appliance first and then unplug
the unit from the wall outlet. Failure to do so could result in electrical shock or
personal injury.
• Use screwdriver to take out the screw.
• Remove the transparent light cover gently.
• Pull out the existing light bulb by unscrewing it counter-clockwise
• Insert new light bulb (E14, max. 10W) by screwing it in clockwise.
• Replace the transparent light cover and tighten screw.
Automatic defrost
There is no need for manual defrosting of this appliance due to automatic
defrosting function.
• The ice build-up on the inner back wall during compressor operation will
be automatically defrosted once the compressor cycle is off.
• Defrost water will drain out passing through the drain outlet in the inner
back wall into a drain pan located above the compressor, from where it
evaporates.
25

Care and maintenance

Cleaning your appliance
• Upon installation of your new appliance, it is recommended that it be
cleaned thoroughly.
• Turn off the appliance first and then unplug the unit from the wall outlet.
• Remove all contents.
• Wash the inside with a damp warm cloth soaked in lukewarm water and
baking soda solution. The solution should be about 2 tablespoons of
baking soda to a quart of water.
• Be sure to keep the door gasket (seal) clean to keep the unit running
efficiently.
• The outside of the appliance should be cleaned with mild detergent and
warm water.
• Dry the interior and exterior with a soft cloth.
• Dust or anything else blocking the vent may hinder the cooling efficiency
of the appliance. Vacuum the vent if necessary.
Vacation time
• Turn off the appliance first and then unplug the unit from the wall outlet.
• Remove all the contents.
• Clean the appliance.
• Leave the lid open slightly to avoid possible formation of condensation,
mold, or odors.
• Short vacations: Leave the appliance operating during vacations of less
than three weeks.
• Long vacations: If the appliance will not be used for several months,
remove all content and unplug the power cord. Clean and dry the interior
thoroughly. To prevent odor and mold growth, leave the door open
slightly: blocking it open if necessary.
Moving your appliance
• Turn off the appliance first and then unplug the unit from the wall outlet.
• Remove all the contents.
• Securely tape down all loose items inside your appliance.
• Tape the doors shut.
26 32