Energy saving tips
•
The appliance should be located in the coolest area of the room, away
from heat producing appliances or heating ducts, and out of the direct
sunlight.
•
Ensure that door is closed when the appliance is turned on.
Troubleshooting
Try the suggestions below to see if you can solve the problem before calling
for service.
PROBLEM
POSSIBLE CAUSE
Appliance does not
• Not plugged in.
operate.
• The circuit breaker trippedor a blown
fuse.
Temperature inside the
• Temperature control is set too warm.Turn
appliance is too high.
the control to a cooler setting and allow
several hours for the temperature to
stabilize
• Door is kept open too long or is opened
too frequently. Warm air enters the
appliance every time the door
opened.open the door less often.
• The door is not closed completely.
• The door gasket does not seal properly.
• The appliance has recently been
disconnected for a period of time, 4
hours are required for the appliance to
cool down completely.
27
PROBLEM
POSSIBLE CAUSE
Temperature inside the
• Temperature control is set too cold. Turn
appliance is too low.
the control to a warmer setting and allow
several hours for the temperature to
stabilize. time, 4 hours are required for
the appliance to cool down completely.
Moisture forms on inside
• Door is slightly open.
appliance walls.
• Door is kept open too long, or is opened
too frequently,open the door less often.
• The door is not sealed properly.
Vibrations.
• Check to assure that the appliance is on
a level surface.
• The appliance is touching the wall. Re-
level the appliance and move it from the
wall.
• If continued vibration occurs, turn off the
appliance and unplug the power plug.
Contact Customer Service Dept. for
further assistance.
Moisture forms on outside
• Door is slightly open, causing cold air
of appliance.
from inside the appliance to meet warm
moist air from outside.
The door will not close
• The appliance is not on a level surface.
properly.
• The gasket is dirty.
28
34