Display; Standby Mode; Operating Mode - Steinbach MINI Manual Del Usuario

Display

Standby mode

In standby mode, the heat pump is ready for operation but it is deactivated. By pressing the On/Off
button, the heat pump switches to operating mode.
After switching on, the heat exchanger has to heat up first before the heat pump is ready
for use in operating mode. This process can take up to 90 seconds.
Display:
G
14
- The display shows "OFF".
14

Operating mode

In operating mode, the heat pump heats the water to the set water temperature. The standard value for
the set water temperature is 27 °C. You can set the water temperature to a value between +15 °C and
+35 °C. By pressing the On/Off
temperature can be set by pressing the Up button
After switching off, the heat exchanger has to cool down before the fan stops running.
This process can take up to 90 seconds.
15
Set
button, the heat pump switches to standby mode. The desired water
15
or the Down button
16
15
.
17
35