Parameters - Steinbach MINI Manual Del Usuario

Display:
H
14
- The display shows the current water temperature.
14
Saving energy
To reduce energy consumption and related costs, you can take the following measures:
• If you do not use the pool for a few days (e.g., on weekends), keep the current water
temperature approximately at the desired water temperature. The heat pump needs
time to heat up the pool water. If there is a large temperature difference between the
current water temperature and the desired water temperature, it can take several
days until the desired water temperature is reached.
• If do not use the pool for more than a week, shut off the heat pump or reduce the set
water temperature.
• Do not use the heat pump when the ambient temperature falls below 5 °C.
• Cover the pool to prevent heat loss due to wind.

Parameters

In operating mode, the heat pump allows you to display temperatures or make settings by pressing the
SET button . The desired parameter can be selected by pressing the Up button
18
button .
17
Display:
I
14
- The display shows the selected parameter.
14
Available parameters:
The heat pump has two temperature sensors that measure the following temperatures:
36
15 16
Set
17
16
Set
18 17
or the Down
16