Stand Installa�On - LC-POWER LC-M49-DQHD-120-C-Q Manual De Usuario

5. Stand lnstalla�on
1. Open the package, take out the product with foam s�ll a�ached, and
gently place it on a desktop or table.
2. Take out the two main parts of the stand.Then use the included screwdriver
and the
PM5*15mm Screw Bolts
3. Align the stand stem's bracket with the opening on the back of the monitor
and carefully insert bracket.The pieces should click into place.
4. Before removing the stand, remove the port cover from the back of monitor.
Switch the bu�on down to remove the monitor from the bracket.
Make sure the monitor is laid on a flat surface before removing the stand.
Stem
Base
PM5*15mm Screw Bolts x3
to fasten base to the stem.
Eng-4
Bu�on