Publicidad
Idiomas disponibles
Idiomas disponibles
All manuals and user guides at all-guides.com
2. Press SET and 5，the current VOL and mute will be locked,
LED flashes two times to confirm it.
Remark: you can press SET and 6 to unlock it.
C. Write-protection of Device Codes:
To protect the device codes from being inadvertently
overwritten / deleted, you can carry out the
following:
1. Press the device key (e.g. TV) that you would like to protect
on your remote control.
2. Press and hold down the SET key and press the 7 key at the
same time. Then release the both pressed
keys, the LED will flash twice and the code is then protected
from being overwritten/deleted.
Note: To cancel write protection,please press the SET key and
hold it down, and activate the 8 key at the
same time, and then release the both pressed keys. The LED
flashes twice and the protection have been
cancelled.
D．Set up Macro:
Macro function let you make sequent operation for you home
theater.
Please
press M1 key ( or M2 key),
and then release it. The remote control will send out a sequent
IR commands that you programmed before.
You can set up a Macro by following below steps:
1. Press and hold down the SET key and press the M1 key at
the same time. then release it and the LED on
that means it is in the setting up mode.
2. You can select the device and function key for a sequent
operation what you enjoyed. (e.g.:
TV+POWER+MUTE+TV/AV, DVD+PLAY,
VCR+RECORD, etc. That means you want to turn on
the TV and shut off its sound, switch TV and input to AV port,
DVD start to play disc, VCR begins to
record at the same time. )
3. Press the M1 key to save the setting, LED then exit to
current setup state.
E．Reset / Delete Function:
To delete the codes which have been set up in the remote
control, press and hold down the SET key, then
press the 0 key simultaneously for more than 3 seconds and
then release the both pressed keys. The LED
will flash twice and all the set up data and all learn commands
in the remote control are deleted.
Remark: Please don't operate this function if you don't want to
delete all the settings.
Publicidad
