Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Operation
The BasicMes-2 automatically returns to main screen where
valve presetting can be changed. Default presetting is
lowest presetting stored in database
Setting presetting after valve selection
Operation
Restart measurement
Increase presetting value
Decrease presetting value
New presetting and kv-value are shown in display and are
immediately used for flow calculation
Changing presetting during flow
measurement
Operation
Increase presetting value
Decrease presetting value
New presetting and kv-value are shown in display and are
immediately used for flow calculation
5.2 Project Function ("Select project")
A project is a collection of pre-defined valves and valve
presettings which can be worked off one by one without
having to select valve and valve presetting from database
first.
A project can be created in two ways:
•
with user software and then uploaded onto device
•
with device itself by selection menu item "New project"
5.2.1 Selecting an existing project
Operation
Highlight project
Select project
Highlight and select riser
The BasicMes-2 automatically returns to main screen where
valve presetting can be changed. Default presetting is
presetting stored in projectWhen desired flow is reached:
Stop measurement
Open menu
To save measured value in project:
Save measurement
Select project and riser
A – If no measurement has been stored for this riser before,
confirmation appears that measurement has been saved
MU2H-2323GE25 R0620
GB
Command Key
Command Key
PROCEED
ON
UP
DOWN
È
Command Key
UP
DOWN
È
Command Key
UP/
È
DOWN
OK
ON
OK
UP/
È
DOWN /
ON
STOP
ON
MENU
ESC
SAVE
ON
OK
È
Operation
Confirm message
The BasicMes-2 returns to main menu
B1 – If measurement has already been stored for this riser
but should be overwritten with new data:
Confirm to overwrite existing
data
Confirmation that measurement has been saved
Confirm message
The BasicMes-2 returns to main menu
B2 – If measurement has already been stored for this riser
which should not be overwritten:
Decline to overwrite existing
data
The BasicMes-2 returns to riser selection where either
•
another riser can be selected to store measurement,
or
•
a new riser can be defined to store measurement, or
•
function can be left without storing measurement
The measurement stays in the buffer memory of the
BasicMes-2 until another riser is selected from the projects
database or another valve is selected from the valve
database or the device is switched off
5.2.2 Defining a new project
Operation
Highlight "New project"
Select "New project"
Project name and number and name of first riser can be
changed if desired
Select "Create project"
Confirm
The new project is added to the projects list
5.2.3 Defining a new riser
A new riser can be defined within any project regardless if it
was created on a PC or on device itself
Operation
If a valve and valve presetting should be assigned to new
riser first select valve from database and set to desired
presetting. If no valve is selected the BasicMes-2 will
automatically assign valve and valve presetting from last
measurement.
Select project to which new riser should be added. List of
existing risers is shown. Item "New riser" is the first item in
the list.
7
Command Key
YES
ON
YES
ON
OK
ON
ON
ESC
Command Key
UP/
È
DOWN
OK
ON
UP/
È
DOWN
OK
ON
Command Key
Publicidad
Tabla de contenido
