Ebode IPV58P2P Guia De Inicio Rapido página 10

By DDNS: if you want to access your camera by a computer.

1. Run the IP Camera Tool, and assign a static IP address for your camera. Please note
this is a step for advanced users. By default your modem / router does not have a static
IP range. This static IP range needs to be configured first. Please refer to the manual of your
modem / router or contact you ISP. Please note that if you do not setup a static range in
your modem / router, you might get network IP conflicts.
Right click your camera
and click Network
Configuration.
Note: For Belgian users, please download the document "Telenet Modem Instructions" from
the CD or from our ebode electronics website.
2. Enable UPnP and DDNS in the camera's settings page. We recommend you to use the
IPCAM DDNS by factory default, but if you want to use the third party DDNS, please check
the user manual for further instructions.
25-8-2014
All manuals and user guides at all-guides.com
Select Yes and click Save.
- 10 -
IP Address: Set this in the
same subnet as your
computer or keep it as
default. Subnet Mask: Keep it
as default. Gateway and DNS
Server: Set it to the IP
address of your router.
Input the Username and
password, click OK.
ebode IPV58P2P