Wireless Connection - Ebode IPV58P2P Guia De Inicio Rapido

Notes:
If you forget your username or password, press and hold the reset button on the

bottom of the camera using a pin for 5 seconds. This resets the camera to factory default.
If you want to access the camera over wireless or Internet, continue with the setup by

following the Wireless and Remote Access steps below.

4. Wireless Connection

1. Choose "Settings" on top of the camera web page, then go to "Network - Wireless
Settings" section on the left side of the screen, then click "Scan".
2. Click the SSID (name of your router) in the list, and the corresponding SSID and
encryption will be filled automatically on the right side of the page. All you need to do is
input the password for your wireless network.
25-8-2014
All manuals and user guides at all-guides.com
Click the SSID (name) of your router, and the
corresponding information will be filled in the fields.
- 8 -
Click through different
pages to see other
wireless networks if
there are more than
10.
Input the password of
your router.
ebode IPV58P2P